Understanding Indoor Relative Humidity and Dew Point
The essential physics of psychrometrics made simple: relative humidity, absolute moisture content, dew point, and how temperature shifts mold risk.
What is Relative Humidity (RH)?
Relative humidity is not an absolute measurement of water volume in the air; it is the percentage of water vapor currently held compared to the maximum amount the air could hold at that exact temperature.
Because warm air expands and holds significantly more moisture than cold air:
- Air at 20°C (68°F) can hold up to 17.3 grams of water per cubic meter ($g/m^3$).
- Air at 10°C (50°F) can hold only 9.4 grams of water per cubic meter.
- Air at 0°C (32°F) can hold only 4.8 grams of water per cubic meter.
This single physical principle explains why cooling a room without removing moisture causes relative humidity to skyrocket.
What is the Dew Point?
The dew point is the temperature to which air must be cooled for relative humidity to reach 100% (saturation).
If your living room is 21°C with 65% relative humidity, the dew point is 14.1°C.
- Any surface in that room cooler than 14.1°C (such as window glass, an uninsulated external wall corner, or a cold water pipe) will immediately form liquid condensation.
- If you lower the room humidity to 45% RH, the dew point plunges to 8.8°C, making condensation far less likely on all surfaces.
Indoor Humidity Health & Comfort Zones
[ < 30% RH ] -> Too dry: Sinus irritation, static shocks, virus survival
[ 40% - 55% ] -> Optimal Zone: Maximum comfort, no condensation, zero mold
[ 55% - 65% ] -> Caution: Condensation on cold glass during freezing weather
[ > 65% RH ] -> Danger Zone: Rapid dust mite multiplication, fungal germination
Why does my hygrometer reading go up when the heating turns off?
Because cooler air holds less water vapor. The absolute quantity of water in the room has not changed, but the relative percentage of saturation increases as temperature drops.
How accurate are cheap digital hygrometers?
Most entry-level consumer hygrometers have an accuracy of ±5% RH. Calibrate them using the standard salt-slurry test in an airtight container (which creates a 75% reference RH).
- · ASHRAE Handbook of Fundamentals: Psychrometric Charts and Equations
- · Chartered Institution of Building Services Engineers (CIBSE) Guide A: Environmental Design